Description: This series of equipment is suitable for printing on all kinds of flat materials such as membrane switch, name plate, LCD display, keyboard, instrument panel, glass, ceramic decals, paper etc.
FEATURES：
1. The printing carriage is guided on the double parallel high precision Linear Motion Guide (“Bosch Rexroth”, Germany),instead of the two pillars. And the printing carriage is driven by the “Hoyer” motor from the Danmark together with the “Panasonic” frequency inverter from Japan. The printing frame is fixed on the sub-frame with the support from the rigid side arms. All of these make the machine free from any vibration, guarantee the highest printing repeatability.
2. Motor-driven vertical screen lifting system to prevent any unnecessary ink flow on the screen, small volume of ink can be printed, registration and clean very easily.
3. The printing table is facilitated with X-Y-Z fine pitch registration adjustment with self-locking system, easy for registration. And the surface of the printing table is made from the stainless steel, avoid to be scratched and deformed. The flatness of the printing table is within ±0.03mm,ensure the printed patterns to be more uniform and clear. Even with the function of print Ⅱand Ⅲ,it can thicken the thickness of the ink according to requirement.
4. The printing stroke and sub-frame are variable adjustable and different sizes of printing frames are acceptable.
5. The screen frame is locked by the air cylinder instead of the small hand wheel, easy to load/unload the frame.
6. The pressure on two side of the squeegee and flood coater are balance by itself, doesn’t need to be adjusted by hand.
7. It is equipped with the synchronized peel-off system, peel-off angle is variable adjustable, guaranteed the printing quality.
8. The snap-off distance adjustment is done through the patented ball screw system with direct scale reading, and self-locking. Quick and easy with precision adjustment is the key feature of the machine.
9. The air pump(750W) apply the brand that from Taiwan, the vacuuming action is controlled by the valve and the air cylinder. And the machine is also set with the function of vacuum Ⅱ,make the registration more accurate and easier.
10. In order to improve the quality and the reliability of the machine, all of the important spare parts apply the famous brand that from Japan and Europe. Such as the air cylinder supplied by “PneuWerke” from Switzerland, the valve and air service unit supplied by “Bosch Rexroth” from Germany, the pressure regulator supplied by “NORGREN” from England ,the PLC supplied by “Panasonic” from Japan and so on.
11. The printing action is driven by the advanced digital controlled AC motor (CPG brand ,200W) that from Taiwan and the” Panasonic” frequency inverter. Running on the double parallel high precision Linear Motion Guide (“Bosch Rexroth”, Germany) , together with the timing belt from Israel and the synchronizing wheel from Germany ensure the smooth movement.
12. It is equipped with the protection safety device, ensured the workers’ safety operation.
PARAMETER：
|
Model
|
OTPM-R6080
|
|
Max. printing size
|
600×800mm
|
|
Max. frame size
|
900×1200mm
|
|
Table size
|
700×1000mm
|
|
Mechanical speed
|
1100 p/h
|
|
Stock thickness
|
0~30mm
|
|
X,Y and Z adjustment
|
+/-10mm
|
|
Mechanical repeatability
|
±0.01mm
|
|
Manifold air pressure
|
0.5~0.6Mpa
|
|
Air consumption
(approx.)
|
0.12L/ P
|
|
Electricity
|
3P 380V/50Hz
|
|
Power
|
3kw
|
|
Dimension(mm)
|
1560×1200×1800
|
|
Net weight(approx.)
|
748kg
|
|
