Products
New products
Screen printing equipment
screen printing machine
Glass screen printing machine
PCB Screen Printing Machine
Special screen printing machine
Stretching Machine Serial
 
Home > Products > Screen printing equipment > screen printing machine
3/4-AUTOMATIC SCREEN PRINTING MACHINE WITH THE GRIPPER SYSTEM TPM-D/M Series

Description: This series of equipment is suitable for printing on all kinds of thin materials, such as paper, film, plastic sheet, ceramic paper and so on.

FEATURES:

1.         The control console is the advanced TOUCH PANEL SCREEN, pre-programmable with storage upto 20 sets of programmes, easy retrievable for any repeated jobs and modifying for new jobs. The control console is fully mobile for monitoring the operation at any spot of the machine at the option of the operator.
2.         The perfect design ensures the high efficiency and safety. It saves on the labor as it only needs one operator.
3.         The printing carriage is guided on the double parallel high precision Linear Motion Guide supplied by “Bosch Rexroth” from Germany, instead of the two pillars. And the printing carriage is driven by the “ABB” motor from the USA together with the “Schneider” frequency inverter from France. All of these make the machine free from any vibration, guarantee the highest printing repeatability.
4.         Motor-driven vertical screen lifting system to prevent any unnecessary ink flow on the screen, small volume of ink can be printed, registration and clean very easily.
5.         The printing action is driven by the advanced digital controlled AC motor (CPG brand, 200W) that from Taiwan and the “Schneider” frequency inverter. Running on the double parallel high precision Linear Motion Guide supplied by “Bosch Rexroth” from Germany, together with the timing belt from Israel ensure the smooth movement.
6.         The surface of the printing table is make from the stainless steel, avoid to be scratched and deformed. The flatness of the printing table is within ±0.03mm,ensure the printed patterns to be more uniform and clear. Even with the multiple printing function, it can thicken the thickness of the ink according to requirement.
7.         The machine is equipped with the automatic discharge device. After printing, the printed substrate will be sent to the next process automatically.
8.         It is equipped with the pneumatic frame locking system. Locking the screen frame with the cylinder instead of the small hand wheel. And the sub-frame is facilitated with X-Y-Z fine pitch registration adjustment with self-locking system, very easy for registration.
9.         Change over between the two action-vacuum and air cushion automatically, ensure the printed substrate not to be scratched.
10.      The printing stroke and sub-frame are variable adjustable and different sizes of printing frames are acceptable.
11.      It is equipped with auto peel-off system, peel-off angle and speed are variable adjustable, guaranteed the printing quality.
12.      The snap-off distance adjustment is done through the patented ball screw system with direct scale reading, and self-locking. Quick and easy with precision adjustment is the key feature of the machine.
13.      The air pump (750W) apply the brand that from Taiwan, the vacuuming action is controlled by the valve and the air cylinder. And the machine is also set with the function of vacuum ,make the registration more accurate and easier.
14.      In order to improve the quality and the reliability of the machine, all of the important spare parts   apply the famous brand that from Japan and Europe. Such as the air cylinder supplied by “PneuWerke” from Switzerland, the valve and air service unit supplied by “Bosch Rexroth” from Germany, the pressure regulator supplied by “NORGREN” from England ,the PLC supplied by “Panasonic” from Japan and so on.
15.      It is equipped with the protection safety device, ensured the workers’ safety operation.
 
 
     PARAMETER:
 
Model
TPM-D/M6080
TPM-D/M7010
Max. printing size
600×800mm
700×1000mm
Max. frame size
900×1200mm
1000×1400mm
Table size
700×1000mm
800×1200mm
Mechanical speed
1200 p/h
1000 p/h
Stock thickness
0~30mm
0~30mm
Gripper margin
0.1~5mm
0.1~5 mm
X,Y and Z adjustment
±10mm
±10mm
Mechanical repeatability
±0.01mm
±0.01mm
Manifold air pressure
0.5~0.6Mpa
0.5~0.6Mpa
Air consumption(approx.)
0.12L/P
0.12L/P
Electricity
3P 380V/50Hz
3P 380V/50Hz
Power
3kw
3kw
Dimension(mm)
2120×1200×1740
2320×1300×1740
Net weight(approx.)
871kg
1070 kg
 
 
 
 
 
 
Back
About us   |   Certificate   |   Products   |   News   |   Services   |   Video   |   Contact us
Copyright © www.chinakenny.com ALL RIGHTS RESERVED.
ADD:1st Floor, 2nd Block, No.5 Region, Industrial District, Southern Area, Tianhe North RD. West, Ronggui, Shunde, Foshan, Guangdong
Tel:0757-28888782  Fax:0757-28889630